Grow Marijuana Calendar: Easy Growing Marijuana Tips, Drinks & Recipes

First soak seeds in water over night. Then place the seeds between thick paper towels, lay them on a plate and cover with water. Place the plate in a warm, dark area and wait for the seeds to crack open. Good seeds can take two to seven days. Let the taproot grow a little, up to 0. Then carefully plant the seeds in a small container in no more than 1 cm of soil. When shoots appear, the seedlings need lots of light, about 16 hours a day, and it has to be of a decent intensity, so put them under a grow light. You want the seedlings to grow to no more than 10 cm, which means the lighting system needs to be elevated to maintain a healthy distance about 95 cm as the plants grow taller.

Plan on keeping your seedlings under lights for 30 to 45 days before moving them outdoors. They'll be too stringy and likely won't survive the move outdoors. You want these babies to grow sturdy stalks with a robust root system. Use a plant starter fertilizer with a mix to promote root growth, readily available at hardware stores and garden centres.

But before they go in the ground, you have to toughen them up. You do this by giving them short bursts of direct sunlight - a minute or two on the first day and five minutes on the second day. Keep your plant in a shady area outside after each dose. On the third day, give the plants 10 minutes of direct light, 15 the next, 30 after that, and then your plants should be hardy enough to go into the ground. It's a good idea to transplant using a starter fertilizer again. Also, pot needs room to grow; the more space you give it, the better the yield. From here on in, the plants need regular watering a couple of times a week should suffice.

Pot plants do not like continuous irrigation, but at the same time you do not want the roots to dry out. Let the surface soil dry out to about a depth of 5 cm before watering. In late June, you can apply a fertilizer to stimulate vegetative growth, and again in mid-July. Then in mid-August I recommend using a fertilizer that promotes flowering No more fertilizing after this point. Depending on the variety, your plants should be ready to harvest sometime in September or early October.

Leaves can be used for cooking and the buds for smoking. After growing weed for more than 40 years, I still find new and unique problems. The pitfalls are too many to get into here, and besides, you'll learn through experience. For example, I learned a couple of years back not to grow next to lilacs, which have a tendency to get mouldy toward the end of the summer and infect your weed. Getting cannabis-friendly nutrients is important if you plan to use nutrients during your grow.

Cannabis nutrients are easy to use — just follow the directions, like a recipe. If you are growing in any medium besides soil, you will need to get hydroponic nutrients nutrients specially formulated for hydroponic growing. Some popular soilless mixes for growing cannabis have special nutrients, for example there are many nutrient systems made specifically for growing cannabis in coco coir. Learn everything you need to know about cannabis nutrients: A marijuana-compatible nutrient system will contain everything your cannabis plant needs throughout the grow, and each of the systems I recommend on my cannabis nutrients page comes with a nutrient feeding chart that explains exactly how much nutrients to add at each stage, like a recipe you follow to water your plants.

Keep in mind that you should treat the nutrient feeding chart that comes with your nutrients as the maximum amount to provide to your plants. I recommend that cannabis growers who are using a new type of nutrient for the first time to start with a fraction I usually start with half of the recommended nutrient levels and work your way up only if you see signs of nutrient deficiencies.

Every nutrient schedule is considered a place to start, and to get the absolute best results, you may have to adjust the intensity add more or less water depending on what your plants tell you.

• Gods Tsunami.
• Grow Marijuana Calendar: Easy Growing Marijuana Tips, Drinks & Recipes.
• Sessions with Corinthians: Lessons for the Imperfect.
• How to Grow Weed Hydroponically. Part 7. Step by Step Guide for Beginners.
• Newcomers Guide - Welcome to Munich & Bavaria?

Some cannabis strains love high amounts of nutrients, while others are actually very sensitive and will do best with half the amount of nutrients as other strains. If you start at half strength, I recommend to only move up to a higher dose of nutrients if needed. Use as little nutrients as possible for each plant without the plant showing nutrient deficiencies to achieve the best taste in your harvested buds.

Choose the right cannabis nutrients for your setup https: In order for your plants to be able to actually absorb the nutrients through their roots, they need the right pH of the root environment. This is especially important for any growers using liquid nutrients.

The easiest way to maintain proper pH is to test and adjust the pH of your water before you water your plants.

Complete Cannabis pH Tutorial: This is because the pH actually affects the form that nutrients take. Some forms are easier for the plant to absorb that others. You simply use a specially made pH kit to quickly test and and adjust the pH of your water. The results of paying attention to pH bigger yields, more dense buds and healthy plants speak for themselves. A general rule of thumb is to keep a root pH that ranges from 6. A little bit of range is actually healthy, since different nutrients are absorbed better at different pHs.

Learn everything you need to know about pH and growing cannabis: If growing outside you most likely are going to use soil. Learn more about different growing mediums for cannabis here: Choose the cannabis nutrients if any you plan on using with your cannabis plants. Learn more about nutrients here: Without any plants, growing cannabis is impossible! Learn more about where to find cannabis seeds online here with seed shipping worldwide, including the USA, UK and Australia! Germinate Seeds or Care for Clones.

Basically you want to give your seeds a warm, wet place to start growing. There are many methods and techniques for germination, but I believe the easiest way to start seeds is to place them in a starter cube or seedling plug. I use Rapid Rooters because they are easy to work with — you just stick your cannabis seed in the Rapid Rooter plug, keep your seed warm and slightly moist, and let the Rapid Rooter do its magic.

Sprouts emerge and roots appear in just a few days. Another great option for new growers is to germinate their seeds directly in their final growing medium. In nature, cannabis seedlings would sprout in soil, and they would emerge as their taproots start growing down. Because seeds are already in their final resting place, they will immediately start adjusting to the environment. Every time you transplant or move a sprouted seed, it can cause stress as the young plant needs to readjust its new surroundings.

The first two leaves from your cannabis plant will be round called cotyledons , but after that all the leaves will be serrated like the cannabis leaves you are probably familiar with. Learn everything you need to know about germinating cannabis seeds here: If no humidity cloner is available, some growers mist their clones a few times a day until they start forming roots. This can slow down the rooting process. Once young plants are growing new leaves and getting taller, they are officially in the vegetative stage.

When your cannabis plant first starts growing brand new leaves and stems, it marks the beginning of the vegetative stage. The vegetative stage is a period of growth where your cannabis plant just focuses on getting strong and big. During this stage, cannabis plants will only grow leaves and stems, and will not grow any bud. Cannabis plants should be first placed outside in the Spring. The best time differs depending on where you live in the world, but as long as nights are shorter than 12 hours and days are growing longer, it should be a good time to place plants outside. If plants are placed outside too early while nights are too long they may start budding right away, instead of staying in the vegetative stage.

Therefore make sure your days are long enough to support vegetative growth. The vegetative stage is the easiest part of growing outdoors, and as long as you provide the plants with plenty of light, needed nutrients, and water, your plants should thrive. Outdoors, the amount of time spent by the plant in the vegetative stage is determined by the sun and how long the days are. Plants that get a lot of direct sunlight can grow into trees over the course of one summer.

As the days start growing shorter in the late summer or fall, your cannabis will automatically switch to the flowering stage on its own. The further away from the equator, the sooner cannabis will start flowering and be ready to harvest. For outdoor grow areas closer to the equator, cannabis will be ready to harvest later in the year. Indoor growers can keep cannabis plants in the vegetative stage for as long or short as they want by providing at least 18 hours of light a day.

This is usually accomplished by putting grow lights on a timer. Unlike outdoor growers, indoor growers have more control over the final size and shape of their plant. Indoor growers usually provide either a or light schedule during the vegetative stage of cannabis. The answer depends on which grower you ask, and may even be different from plant to plant. Most weed strains are fine and will flourish when given 24 hours of light a day in the vegetative stage. This also allows growers to use the 6 hours of darkness to help cool the grow area.

According to the Marijuana Horticulture Bible pg 38 , research has shown that most strains of marijuana do grow faster when given 24 hours of light during the vegetative stage. There will always be growers who feel that cannabis plants need some time with the light off a dark period in order to have optimal growth, while others believe that the extra hours of light are better since they give your plants slightly faster growth in veg.

However, many growers seem to agree that ruderalis auto-flowering strains of marijuana grow fastest when given just 18 hours of light a day. So if you are growing auto strains, you may want to consider an light schedule. I personally keep my lights on and schedule 18 hours of light, 6 hours of dark for all my plants during the vegetative stage.

Some delicate strains and autoflowering strains seem to get stressed by a hour light period, and I believe many strains seem to grow healthier with a cool dark period every day. However, I used to grow using 24 hours of light a day for my cannabis plants in veg, and they grew just fine. Daily Care in the Vegetative Stage.

Tutorial: How to Grow Cannabis Indoors!

In the vegetative stage, your job is simple. Cannabis plants grow fast and are tough in the vegetative stage. Provide water — Water plants when top inch of soil feels dry to the touch. In containers, make sure water can drain freely out the bottom. In a hydro setup, there will always be plenty of water. Simply add the directed amount nutrients to your water before giving it to plants or adding to reservoir.

Manage pH levels if using liquid nutrients. Provide light — Keep plants in sun or use your vegetative grow light as directed.

• 31 Ways to Grow Smarter and Maximize Yield.
• Ravens Witch (Twelve Months of Romance - October).
• Shattered World 4 : Global War.
• Learn How to Grow Cannabis Indoors | Grow Weed Easy.

Simply turn grow lights on and keep at the recommended distance from the top of your plants. Outdoors plants will continue vegetating until days start growing short. Not too cold, not too hot — Vegetative cannabis plants prefer a comfortable room temperature or slightly warmer. Avoid low humidity in the vegetative stage if possible. Never allow plants to experience freezing temps. Seedlings may need less water at a time until they are growing vigorously. Especially if young plants are in a big container, avoid giving a lot of water at a time until the plants starts growing faster.

Once plant is growing new leaves and stems regularly, start watering using the techniques explained below. Learn more about watering plants perfectly every time: Vegetative cannabis plants prefer a comfortable room temperature or slightly warmer. Make sure to always check the temperature as experienced by your plants, not the ambient room temperature.

Check the temperature directly under the light where the top of your plants are located. Cannabis plants cannot stand cold temperatures. Freezing temps can kill cannabis. So if plants are kept in a cold area for example a basement , take steps to prevent the plants or roots from getting too cold.

Grow lights will help keep the plant warm, but make sure the bottoms of the plants have a protective barrier from anything that might be too cold. Learn more about temperature for the vegetative stage of cannabis: A good grower always keeps a close eye on their plants, so they can catch and correct any issues before the plant is permanently damaged.

Marijuana plants are very resilient, especially in the vegetative stage. As long as you fix any problem that is hurting them, they will usually bounce back quickly and go on to produce fine buds. Plant training is not crucial to success. You can get to harvest without training your plants. Cannabis growers often want cannabis plants to grow into a certain size and shape to produce the best yields.

The best time to train your cannabis plant is in the vegetative stage. There is very little plant training that can be done in the flowering stage. So if you have special space requirements, make sure you learn about training your plants before they get too big! As a grower, you have a lot of control over the final size and shape. Plant training techniques allow you to create a cannabis plant that grows the way you want. A cannabis plant that is trained to grow short and wide takes full advantage of indoor grow lights. Notice how each of the colas are about the same size, since the plant was trained so that all colas received the same amount of light.

You can control the genetics by choosing to start with a great strain , and plant training will give you the tools you need to get your cannabis to grow the way you want, so you get the best yields possible. When growing indoors, the length of time to keep your plant in the vegetative stage will vary with how big you want your final plant to be.

The longer your plant stays in the vegetative stage, the bigger it will get. A cannabis plant can stay in the vegetative stage for virtually forever, and plants can be kept in the vegetative stage for years if given enough hours of light each day. If you are trying to keep your plants smaller, you will want to keep them in the vegetative stage for a shorter amount of time.

The time spent in the vegetative stage is a big part of what sets the final height of the plant at harvest. A good rule of thumb is to let your plants stay in the vegetative stage until it reaches about half its final height. Cannabis plants often double in height after the switch to the flowering stage. Your plants will start flowering in response to the amount of light they get each day.

In the flowering stage, your cannabis plants will reveal their gender. How can I tell if my plant is male or female? Get rid of male plants immediately to prevent pollination and seedy buds! When Does Flowering Start? Learn more about hermies here: Indoor growers need to change their light schedule to to 12 hours on and 12 hours off to get marijuana plants to start the flowering stage. This is usually accomplished by changing your lighting timer to a schedule so lights automatically turn off for 12 hours a day.

If you have trouble with heat from your lights, it may also be easier to keep your grow room cool if the lights only turn on at night.

How to grow your own marijuana in Toronto

Light leaks can be a big problem during the flowering stage. If you do not maintain consistent night periods, your plants can stop flowering and revert back to the vegetative stage, or even turn into a hermaphrodite. Hermies grow sex organs of both genders, so female plants start growing male pollen sacs which can cause pollination and seedy buds. The flowering stage is one of the most exciting parts of marijuana growing, but it is also the toughest stage life life for cannabis.

As long as your buds remain intact, and you have enough leaves to get you to harvest, you will still produce amazing quality buds. This is a shame because the amount of buds you get in the end is directly proportional to the amount of light the plant receives during the flowering stage. Buds that are lower on the plant, or in the middle of the plant without much access to light and air will tend to stay small. It is tough for many new growers to be patient and wait until their plant is ready to harvest. Many new growers cut their cannabis down too early in excitement, which is a huge waste after spending so long caring for the plant.

You see your plant is growing buds and it can be tempting to want to harvest your buds as soon as possible. I urge you to be patient during this stage. A few weeks of growing could be the difference between getting a half-strength bud or getting a bud that is at full potency, so it is important to try to wait until just the right time to harvest. When cannabis reaches the flowering budding stage, different strains tend to start growing more differently from each other. Some strains grow very tall after being switched to flowering, doubling or tripling their height or more. Other strains stay short and squat after being switched to flowering, and may not stretch much at all.

Let Me Show You: These plants were grown together. The one of the right starts out a bit taller, and grows just a little lankier than the other one. Now look what happens when they get switched over to the flowering stage…. Bud Growth and how to increase yields. One thing that can help you get better yields is to expose your bud sites to more air and light. Some growers tuck leaves away, while other remove leaves that are covering buds sites. Try to get the buds as much light and air exposure as possible, but avoid damaging or over-stressing the plant.

Defoliation removing leaves is a highly controversial technique for growing cannabis. Give Plenty of Light: Giving the maximum amount of brightness to your plants will improve your yields by giving your plant more energy to grow. The highest-yielding cannabis grow lights for the flowering stage are HPS grow lights. Many growers use an HPS grow light in the flowering stage to get bigger yields. Nutrients made for the vegetative stage of growth contain too much nitrogen, which can hinder bud development.

So avoid giving your plant a standard nutrient formula in the flowering stage, especially nutrients high in nitrogen nitrogen is the first number listed on nutrient bottles.

Calendar for the outdoor marijuana growing in Europe

They might start ramping up on nutrients as harvest is coming, in an attempt to get bigger buds. This is not a great strategy. While cannabis plants use a lot of nutrients in the first month following the switch to flower, your cannabis plants will slowly start needing less and less nutrients as they approach harvest. It can be a good idea to slowly start easing down on the amount of nutrients being provided about halfway through the flowering stage, just a little bit at a time.

By keeping nutrient levels relatively low during the second half of the flowering stage, you are preventing nutrient build-up in the plant that could possibly affect the taste of the buds, or prevent proper bud development. Avoid supplements or bud ripening formulas that provide extra nutrients! In magazines and online, flowering cannabis plants are almost always pictured weeks before harvest. This is because leaves start dying and the plants stop looking as picture-perfect as harvest approaches.

In the vegetative stage, cannabis plants tend to be able to thrive in many environments. In the flowering stage, plants start being a little more picky about the environment. What helps a lot with bud development is to control the temperature and humidity of the grow area. Most importantly, avoid too-hot temps! Keep low humidity if you can because low humidity in the flowering stage reduces the chance of mold and increases trichome development.

Harvest Buds at the Correct Time: Harvesting too early is one of the best ways to reduce your yields, and is a common mistake for new growers. Cannabis plants fatten their buds up considerably in the last few weeks before harvest, and this last-minute budding adds a lot of extra weight to your final yields. However, marijuana actually contains several different substances which produce the desired effects including something known as CBD.

There is another well-known cannabinoid known as CBN. Harvesting a marijuana plant on the early side will tend to produce bud which gives you more of a buzzed, in-your-head experience. However, early-harvested buds give some people anxiety, as well as headaches.

NOW Newsletters

Harvesting a bit later will give your bud more of that stony, relaxed sort of feeling that makes your eyelids feel heavy. Thankfully, there is a relatively long window of time where cannabis can be harvested, depending on the strain. Some growers harvest after only 2 months of flowering, while others wait as long as 4 months or more.

The amount of time needed in the flowering stage before harvest is heavily dependent on strain and personal preference. However, there are some general rules to follow. Quick note before you harvest your plants: For better tasting buds, some people recommend changing how you feed your cannabis during the last two weeks before harvest, as follows….

Some people stop providing nutrients to their cannabis for the last two weeks before harvest in order to let the plant flush out any extra nutrient buildup or salts that may lead to a chemical nutrient taste. Some growers also feed their marijuana plants one teaspoon of blackstrap molasses per gallon of water during the last two weeks to help produce bigger and tastier buds. The molasses contains sugars to help bulk up your buds.

Even if you stop adding nutrients to your water for the last two weeks, you still want to pH your water so the plant can access any leftover nutrients that are still available in your growing medium. One method to find out if your cannabis is ready for harvest is to look at the little white hairs pistils that have been growing out of your bud. These little hairs are actually the pistils for the bud flowers marijuana bud is actually just a bunch of little flowers called calyxes all clustered together. When the hairs first appear, they are all white. As time goes on, with most cannabis strains the pistils start to curl in and darken.

These hairs turn yellow, red, or brown, or even purple or pink, depending partially on the strain, and partially on growing conditions. Some strains for example White Widow tend to stay mostly white even as they approach harvest.

To report this review as inappropriate, please complete this short form.

There will be lots of times where it seems like the cannabis buds are getting close to being done, then they will suddenly grow a whole bunch of new white pistils. While I like waiting until nearly all the pistils have turned, many others prefer to harvest sooner than that and they get great results too! You need to figure out what is optimal for you and your body. Just remember that there is a 2-week range where marijuana can be harvested, so you do have a little wiggle room.

Just looking at the plants is not always precise enough especially when a plant is growing in an unexpected ways as you approach harvest time. These trichomes are what contain the majority of cannabinoids the good stuff in your buds, and they change in appearance as harvest time approaches. Growers can look at the glandular stalked trichomes on the buds under a magnifier, and this gives you the information you need to know the best time to harvest for your needs. A bit of random trivia for you: These trichomes are supposed to taste bad to animals and deter them from eating the marijuana plant but many cats love the taste of these trichomes!

You will notice that some cats will trick to lick or chew the leaves and buds of your flowering marijuana plant after they get a taste. The trichomes look like little mushrooms under a 30xx power, illuminated microscope. For harvest, you want to pay attention to the trichomes that look like the little mushrooms. In this case most of the trichomes are cloudy, with a few ambers here and there. These buds are ready to harvest. For relaxing, more anti-anxiety buds, wait until some of the cloudy trichomes have darkened to amber.

When growing your own, I recommend sampling buds off your plant at different stages to get an idea what your preference is. The hardest part of growing for many new growers is waiting for the right time to harvest. There is a strong tendency to harvest the plant early due to excitement. If you are feeling excited about harvesting your plant, then takes branches off the lower part of the plant that look the most done and dry them and check the potency for yourself.

Harvesting the buds in stages starting off slowly with small batches can really help abate the excitement. Remember, 2 months is the minimum length of the flowering stage while your cannabis is growing buds. Advice on using illuminated hand-held microscope: When using an illuminated microscope for the first time, my advice is to actually cut a piece of bud off the plant. You can try to look at the trichomes on the live plant but it can be a bit difficult.

If possible, put the piece of bud down on something stable such as a table. At that point, you want to take the microscope and push down relatively hard in a place where there are trichomes on the bud is besst. Once the microscope is firmly pressed on the the plant, you can adjust the microscope focus to be able to see the trichomes. After a while, you get used to using the microscope and it gets easier. You still need to trim, dry and cure your buds before they will be ready to use. Curing technically starts when the plant stops getting water.

From that moment on, your plant is drying and beginning the curing process. Read the Complete Tutorial Here: If you prepare your marijuana buds the proper way, you will ensure the smoothest, best-tasting result. I will describe a simple and easy, yet effective method below. You can hang the entire plant but the drying process will go much faster if you cut off branches or individual buds from the plant and then hang up your pieces of bud to dry.

You will need to trim the leaves near the bud but remember that you can make edibles, hash oil or canna caps from the small leaves that grow close to the bud. Optimally want to dry your buds slow, so this may be a good technique if you live in a very dry climate. Trimming buds after drying is very difficult. After you have cut off and trimmed your buds, you hang them upside down in a cool. Make sure to space your buds evenly without touching each other so they can dry out properly without molding. Very humid air or too much moisture during the drying process is your enemy because it can cause mold.

At lower humidities, your drying will go much faster, so you need to watch buds closely and pull them down before they get overdried. Drying as slowly as possible without mold will give you the highest quality buds, as this enhances the curing process. Basically you can hang buds upside down anywhere you want. This is a time to use your creative skills! An easy way to hang your buds to dry is pin them to coat hangers using clothes pins and simply hand the coat hangers in a closet.

• Innate Immune System of Skin and Oral Mucosa: Properties and Impact in Pharmaceutics, Cosmetics, and Personal Care Products?
• Sedition (A Political Conspiracy Book 1).
• Calendar 2018 for the outdoor marijuana growing in Europe?
• How to Grow Weed Hydroponically. Part 7. Step by Step Guide for Beginners;
• A War of Their Own: Bombers over the Southwest Pacific - World War II Fifth Air Force Air War, General George Kenney, U.S. Army Air Forces (AAF)?
• Existe-t-il une culture europeenne? - Les Arts en Europe (French Edition);

You can also place them on mesh drying racks. These are a good choice for a humid environment, or if you plan on drying a lot of fresh bud together in a small space. By removing the buds from the stems and putting them on a mesh rack, they will dry a lot more quickly than if they were hung upside down with the buds still on the stems.

The inside of your grow space or grow tent can also be a really nice choice. I personally hang my trimmed cannabis buds in my grow tent which was holding my now-harvested plants. A grow tent is a great place to dry cannabis, with a controlled environment and many places to hang bud. Drying is the first part of the pot curing process. When the buds still have moisture in the center, their stems will bend without breaking when you apply pressure to the stem. Once the plants are dried to the middle, the stems will begin to snap instead of bend.

You want to be careful of over-drying your weed, or buds will crumble when you try to break it up. If this happens, some growers recommend ways to re-moisten the buds with water and hang them to dry again, but this may not help. Cannabis bud seems to cure best if you dry it out slowly one time, and re-misting also means there is a greater opportunity for mold to grow. This is done by placing the dried buds in quart-sized mason jars. The curing process is a delicate dance of trying to maintain enough moisture to continue curing the buds, but not enough moisture to promote mold.

You try to keep things just right. A hygrometer will help. Almost all marijuana enthusiasts agree that the best smell and flavor is obtained after the marijuana has been cured for some length of time. But the important thing is it works. However, curing for more than 6 months does not seem to continue to add much potency.

I personally cure buds for months. To cure your freshly dried buds, just put them in a tightly-closed jar in a cool dark place. A quart-sized mason jar works great. You will be spending the next few weeks monitoring your buds in the jars, and in about 2 weeks, they will be ready for use! The best cure will happen if you can keep a very close eye on your buds throughout the cure and allow them to finish drying as slowly as possible.

Use a Hygrometer To Track Moisture! The easiest way to track the relative moisture content and ensure a perfect cure every time is to keep your curing buds in mason jars with a hygrometer inside. Learn more in the curing tutorial: If buds ever feel wet during the curing process, it means you need to release extra moisture from the jar. Some moisture is still stored in the stems of your buds, even after buds seem mostly dry, and once you start curing the buds, any remaining moisture will spread out evenly through the plant and come to the surface.

Whenever the outsides of buds feel wet, simply open the tops of your jars and allow the buds to be exposed to air until buds feel dry on the outside. It may take 10 minutes, or it may take a few hours depending on how wet the buds are. This will allow your buds to drying slowly, just enough to remove extra moisture trapped in the jar. There needs to be moisture for the curing process to continue, but buds should never be allowed to feel wet on the outside or they are more likely to be attacked by mold.

If you open the jar and it smells really funky not a good funky , there may be hidden moisture in some of your buds which may not have dried completely and could be in the beginning stages of growing mold due to the moisture. This especially tends to happen with big fat buds that were cut off the main cola. I generally recommend trashing any buds you suspect may have mold. For the first 2 weeks of curing: Open your jars for a few seconds regularly.

From 2 weeks and on: If buds are wet or moist when you open the jars, then keep opening them every day until they have felt dry to the touch every day for at least a week. I usually let my buds cure for months, as they seem to get more potent as time goes on. Some people only cure their bud for weeks total while other cure their bud for months or more. Buds continue curing for up to 6 months. At that point, they will not gain any more benefits from further curing, and you should start thinking about long-term storage.

In general, cannabis plants enjoy temperatures in the same general range that humans like, perhaps a little warmer. If a temperature is too hot or cold for a human to comfortable hang out in, it probably is too hot or too cold for your weed. Depending on the type of grow lights used, the lights will probably raise the temperature of your grow space, which is something you should consider when creating your grow area.

Cannabis likes temperatures from about degrees F degrees C. Bigger and more powerful lights will raise the temperature more, and smaller grow areas will be more prone to temperature fluctuations due to the lights. Learn how to control temperature in the grow room: Cannabis kept in lower humidity conditions will drink more water, while cannabis in high humidity conditions will collect water through the leaves and drink less through the roots.

However, towards the end of the florwering stage, cannabis will do better in a drier environment. Some strains are especially prone to mold at high humidity. On the flip side, extra dry air is often associated with finicky plants that get easily stressed for no reason, especially for younger marijuana plants. Therefore if you have unexplainable problems with your plants, and you know your grow area is very dry or humid, try investing in a humidifier or dehumidifier.

You may be surprised how often fixing the humidity fixes mysterious marijuana plant problems. Towards the last few weeks before harvest, it becomes essential to keep humidity lower in order to prevent mold, especially when there are huge, dense buds. Many pro growers dramatically drop humidity with a dehumidifier during the last two weeks before harvest. During the last two weeks before harvest, you can basically drop the humidity as low as possible. Learn everything you need to know about humidity: They need a constant supply of CO2 usually by giving the plant fresh air to flourish.

This will help prevent hot spots, and gets fresh air and CO2 to all the plants in your grow space. One of the most recognizable aspects of cannabis is its pungent, unique smell. Unfortunately, that same delightful smell is instantly recognizable, and can cause lots of trouble for growers. Fortunately, smell control in the grow room is straightforward. There are two ways of stopping smells in the grow room. Learn about all your options for smell control here: No smell — No one should be able to smell your grow or smell cannabis on you.

This makes you an easy target for police and marijuana haters! No sell — Statistically, people who are growing strictly for personal use deal with far less legal troubles than people who sell their cannabis. No tell — Having fewer people know about your grow reduces the chances of you getting busted by law enforcement or burglarized by thieves.

It can be amazing how fast information can spread to a group once one person knows. Read the full stealth tutorial here: This tutorial breaks down everything you need to know about watering cannabis: I commonly see new growers with tall, stretched seedlings. Too-tall seedlings is almost always caused when the plant is not getting enough light. In that case, move lights closer or get a more powerful grow light. Genetics can have a powerful effect on plant size and growing habits. It will help you know what to expect. Learn more about picking the right strain here: